7130 Sailing ship kite
Size: 140cm long or 100cm long
Material: polyeser
Frame: glassfiber and bamboo
Flies well.
Sailing Kite Installation Instructions
There are hull 1, sail 1 set, 2 masts, hull support rods 2 in the package.
1. Take out of the hull out of the package, sails, masts, hull support rod. from the package.
2. Insert 2 hull support rods into the holes in the middle of the hull respectively.
Insert two ends of each rod into the hole on the shipboard.
3. Insert the longer mast into the hole near the nose of ship. Link the line with the tip of the nose.
Insert the shorter mast into the hole near the stern. Link the line with the tip of stern.
4. Hang the loop of the longer line of the sail on the hook of the longer mast.
Then hang sails well from up to down one by one.
Then hang two loops on the 2 ends the hull support rod respectively.
Hang the loop of the shorter line of the sail on the hook of the shorter mast.
Then hang sails well from up to down one by one.
Then hang two loops on the 2 ends the hull support rod respectively.
5. Finally, pull 2 the hull support rods.
Move the loops of longer and shorter lines into the sides inside shipboard.
